Pride Mobility JAZZY 1113 ATS Manuale del Proprietario Scaricare il pdf (Pagina 19)

Jazzy 1113 ATS www.pridemobility.com 19

INITIAL ASSEMBLY

Your power chair may require some assembly either before initial use or after transportation. It may also require disassembly

to make some comfort adjustments.

NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the power chair must be

replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon

insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores

or through your authorized Pride Provider.

Seat Installation

It may be necessary to install the seat either prior to initial operation or after transporting your power chair. Most seats are attached

to the power base with the Universal Mounting System (UMS). The UMS consists of universal parts that may be attached to any

medium-back or high-back seat, regardless of seat width or seat depth. The two main components are aluminum extrusions

mounted to the seat base. These extrusions attach to a pair of trapeze bars that are mounted to the power base.

WARNING! Do not pick up the seat frame by the armrests. They are free to pivot, and you may lose

control of the seat if they do so.

To install the seat:

1. Set the trapeze bars to the desired height. To change the trapeze bar height, see V. “Comfort Adjustments.”

2. Tilt the seat back, and slide the rear extrusion onto the rear trapeze bar. See figure 11.

3. Lower the front extrusion onto the front trapeze bar until the seat locks into place.

4. Flip the seat latch safety down. See figure 12.

WARNING! Make sure the seat latch safety is flipped down before using your power chair.

5. Install the controller into one of the armrests. See V. “Comfort Adjustments.”

SEAT LATCH SAFETY

Figure 12. Seat Latch Safety

Figure 11. Universal Mounting System

FRONT TRAPEZE BAR

FRONT EXTRUSION

REAR

TRAPEZE

BAR

REAR EXTRUSION

IV. DISASSEMBLY AND ASSEMBLY

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 43 44

Nessun commento

Pride Mobility JAZZY 1113 ATS Manuale del Proprietario Pagina 19